Firevision consist of 256 flame head(16x16), like LED writing board, 400 x 357 cm Huge flashing and illuminate moving sign from side to side or schrolling. This system also support multi language. The Programmable fire display. Your Ad message to attract attention. Suitable for Big events or plazas.
SFX Fluid is name of colored flame fluid, which burns in color or red, green, blue, gold, purple and orange.SFX Fluid is alcohol based fluid so that it is very much flammable. It is miscible with water and burns clean with almost no smoke. SFX Fluid is highly flammable liquid and classified as dangerous goods for transportation by air or sea. For the air-shipment, SFX Fluid should be packed, labelled and inspected according to IATA rules and regulation.The maximum package size via air-shipment is 20L jerrican. For the sea-shipment, SFX Fluid should be packed in the jerricans or drums, which are certified by the authority. Also, the mixed shipment with other shippers to the same container of 20 foot or 40 foot is not allowed. Our colored flame is not visible during daylight becasue it has almost no glow while burning. So, during daylight, colored flame effect is not possible. The available colors of SFX fluid are Red, Green, Blue, Gold, Purple and Orange.
Volcano Flame System can shoot LPG flame pillar 2 ~ 3 meter high. The LPG gas tank(2KG, 4.5LBS) is housed inside the system so that there is no need to run gas hose from LPG gas tank. Just connect power code and DMX signal cable and operate.
Fire Bird Flame System is designed for indoor use as well as for using at the wedding ceremony mainly.
This system can shoot approx. less than 1 meter flame and its fuel is butane gas canister(about 230gr).
3 butane gas canisters are installed inside the system(one is for pilot flame and the other two are for main flame). The main flame fuel canisters are warmed with heaters so that it can make the flame height approx. 2 meter
Power Flames can make a propane fire ball up to 8 m (Power Flame I) or 12 m (Power Flame II) high. Inside the system a gas tank is installed and propane gas from an external gas cylinder is used to charge the Power Flame unit. It takes about 10 to 20 seconds for charging. The Power Flames uses a spark to ignite the pilot flame. This pilot flame must be monitored by the rod flame sensor before big flames can be made. The system is controlled by standard DMX controller.
Prism Flame System can fire a desired single color flame among four colors. Using color flame fluid that mixes with propane gas or nitrogen gas will generate a colored flame between 1.5 and 3 meter high, depending on the propellant gas. Up to four different color flame fluid bottles (900ml) can be housed inside Prism flame. For safety purpose, Prism Flame is equipped with a pilot flame detection (electrode) and its safeguard control board.