A single phase, input and output cable with Quick-connectors. Use the new monitor.
ACS series Variable frequency constant pressure water supply system The industry-leading PWM pulse width modulation technology，using VVVF frequency conversion variable pressure control mode,and combined with a pressure sensing technology .it can adjust the motor speed in real time through real-time monitoring of pipe network pressure changes, so as to realize the control mode of the outlet pressure constant ,also achieved the purpose of saving water and electricity.
Single product size: 18.6 * 15.8 * 11.1 cm Single carton size: 23.7 * 23.7 * 13.3 cm Wooden pallet dimensions: 100*100*15 cm Weight of the wooden pallet: 18 kg Volume of the wooden pallet: 0.15 cubic meters Quantity per pallet: 160 pieces Dimensions of the fully loaded pallet (with goods): 100*100*160 cm Volume of the fully loaded pallet (with goods): 1.6 cubic meters
ACS series Variable frequency constant pressure water supply system The industry-leading PWM pulse width modulation technology，using VVVF frequency conversion variable pressure control mode,and combined with a pressure sensing technology .it can adjust the motor speed in real time through real-time monitoring of pipe network pressure changes, so as to realize the control mode of the outlet pressure constant ,also achieved the purpose of saving water and electricity.
For 3-phase pumps up to 10A
Single product size: 18.6 * 15.8 * 11.1 cm Single carton size: 23.7 * 23.7 * 13.3 cm Wooden pallet dimensions: 100*100*15 cm Weight of the wooden pallet: 18 kg Volume of the wooden pallet: 0.15 cubic meters Quantity per pallet: 160 pieces Dimensions of the fully loaded pallet (with goods): 100*100*160 cm Volume of the fully loaded pallet (with goods): 1.6 cubic meters
Low temperature liquid storage tank 1. Technical parameters for design of low-temperature storage tanks one Product model: CDK5/1.6 Strain Strengthening (PS) for Low Temperature Liquid Storage Tanks two Placement form District car support three Design standards TSG21-2016. GB/T150-2011. GB/T18442-2019 four Design pressure (inner container/outer container) 5B:1.68MPa/-0. 1MPa five Maximum working pressure (inner/outer container) 5B: 1.6MPa/-0.1MPa six Design Temperature -196 C/50°C seven Full volume/effective volume 5000L/4750L eight filling ratio 95%， LO2 filling capacity 5225kg nine Main material Inner cylinder/head S30408 GB/T24511-2017 ten Outer cylinder/head Q345RGB/T713-2014 eleven Filling Medium Liquid nitrogen (3839kg), liquid oxygen (5403kg) Liquid argon (6645kg) twelve Insulation method and insulation thickness High vacuum multi-layer winding 25mm thirteen Types of pressure tests and test pressures hydrostatic test 2.55MPa fourteen Types of leakage experiments and test pressures Air tightness test 1.60MPa fourteen Non destructive testing methods and proportions RT\PT\MT 100% inside and 20% outside fourteen Vacuum interlayer leakage rate 1x10* Pa. m3/s fifteen Static evaporation rate (liquid nitrogen) 0. 45%/d sixteen Internal container pressure at factory 20KPA seventeen Factory vacuum degree C0. 01Pa eighteen Paint brand and film thickness Haihong aged 250um nineteen Supporting form Neck suspension+support twenty Product dimensions in millimeters 2331 X 2325 X 3086mm twenty-one Chassis dimensions (length x width) mm 2200*2200mm twenty-two Equipment weight (including base bracket) 2734kg twenty-three Internal and external pipeline materials S30408 GB/T14976-2016 twenty-four supercharger 20Nm3/h twenty-five vaporizer 80Nm3/h twenty-six Outlet pressure 1. 6-0. 1MPa twenty-seven design service life 50 years
Automatic changeover switch NXZM-250S/4B 250A NXZM series integral ATS (Chint) The NXZM series automatic transfer switch is designed to automatically switch from one power source to another to maintain normal power supply to the load circuit. It is suitable for working with three-phase four wire overhead power lines. This type of line with redundant neutral grounding conductors exists in industrial facilities and general networks (multi story buildings, residential areas, etc.). The NXZM series covers a range of models from 63 to 800 A. This device can operate stably under difficult working conditions, such as decreased heat and humidity, extremely low or high temperatures, salt spray formation, etc. Multiple modes of operation Basic input and self-service refund. When the voltage drops, the load will automatically switch from the backup input to the power supply. When the voltage is restored at the main input terminal, the device will automatically switch the load back to the power supply from the first input terminal. Two equivalent inputs. This operating mode assumes that the primary input and backup input are under equal conditions. If there is no voltage on the first input, the load switches to the second input. Even if the voltage at the first input terminal recovers, it will continue to be powered by it. That is to say, there is no self return. Meanwhile, if necessary, you can manually switch at any time. The operating mode of the generator. It assumes that the generator set serves as a backup power source. In this mode, additional control functions will be activated. In addition to switching to backup power, the NXZM series integral ATS also provides signals to start and stop the generator. Meanwhile, the control unit can be used to independently set switches or signal time settings. equipment characteristics Run in "site to site" or "network to generator" mode. It can be switched from one collective network to another, or from the power grid to a backup generator. This greatly expands the application scope of the NXZM series integrated ATS. Automatic and manual movements. The power transfer from one input to another can be done not only automatically, but also manually. To achieve this, simply rotate the control handle on the device body. Network parameter indication. The current status of the device is indicated by indicator lights that emit signals. With the help of a digital display screen, you can find the current parameters and other relevant information of two inputs. The direct and feedback functions used in conjunction with the fire protection system. It allows you to interact with the control system of fire extinguishing, warning, and evacuation lighting circuits. High judgement ability. The maximum breaking capacity of NXZM series models reaches 50 kA, which is higher than the performance of many other similar integral ATS. Protection function Overvoltage protection. Voltage monitoring of main and backup power sources. Automatically switch when overvoltage occurs. Adjust the switch time delay. Undervoltage protection. Monitor the voltage parameters of two input terminals. Switch to another input at low voltage. Adjustable voltage set point and conversion time delay. Lack of phase protection. If voltage disconnection or phase failure is detected, it will switch to another input. Overload protection. Detect overcurrent in the circuit and transfer the load power to another input. Short circuit protection. Automatically switch when short-circuit current occurs. The overload and short-circuit currents of both input terminals are monitored. Design Features Overall design. The integrated structure of Chint NXZM series ATS makes it simple and fast to integrate into the distribution panel. In addition, the integrated ATS operates more reliably and is less susceptible to environmental influences (the casing can prevent dust, dirt, and water splashes). Compact body size. The new functional layout makes it possible to significantly reduce the size of the device. The manual control handle is located on the right side. The display unit is placed on the lid of the candy stick. This makes it possible to reduce the width of the hull. Detachable display unit. It allows you to place it on the cabinet door to intuitively control the current operating mode, the status of two inputs, the operating voltage value, and other parameters. It can control the operation of equipment without entering the interior of the cabinet. The device comes with an extension cable for connecting the display unit. Ergonomic handle. It is used for manually switching modes. The shape of the handle and its position on the right side of the device help to grip comfortably and elevate the user experience to a higher level. Overview of NXZM Series Integrated ATS (CHINT) 3 reasons to choose Chint products Quality Assurance The holding company has its own laboratory for testing new products and issuing DEKRA certificates. Each product undergoes comprehensive testing before being sold. affordable price The Chint factory adopts fully automated production, resulting in lower human resource costs. This is how the company maintains low-priced products. All products are certified The quality has been confirmed by international certifications UL (USA), VDE (Germany), KEMA (Netherlands), EAC (Customs Union), and RoHS. The latter ensures that the product does not harm the environment or threaten human health. article two hundred and fifty-six thousand eight hundred and six series NXZM Ultimate breaking ability 35mA type two hundred and fifty Number of phases three produce China Producer: chint
ORDEN
vacía
